
After 3 years of hard work, Dejan(a programmer from Serbia) has made unlocking of BB5 phones possible...In other words, you can now unlock your 6630, 6680, E60, N70, N71, N80, N90, N91 & N93... No need to pay large sums of money to phone operators…
ONLY THE FOLLOWING PHONES CAN BE UNLOCKED BY DEJAN'S UNLOCKER:
Nokia 3250 RAGGSM v1.1 PA
Nokia 5200 RAPGSM v1.1 PA
Nokia 5300 RAPGSM v1.1 PA
Nokia 6085 RAPGSM v1.1 PA
Nokia 6136 RAPGSM v1.1 PA
Nokia 6270 RAGGSM v1.1 PA
Nokia 6280/6288 RM78 v03.81 09-05-06
Nokia 6630 RAP3G v2.10E PA
Nokia 6680 RAP3G v2.0E PA
Nokia 6681 RAP3G v2.0E PA
Nokia 7370 RAPGSM v1.1 PA
Nokia E50 RAPGSM v1.1 PA
Nokia E60 RAP3G v2.20E PA
Nokia E65 RAP3G v2.20E PA
Nokia E70 RAP3G v2.20E PA
Nokia N70 RAP3G v2.20 PA
Nokia N71 RAP3G v2.20 PA
Nokia N72 RAP v2.21E PA
Nokia N73 RAP3GS v2.0E
Nokia N80 RAP3GS v2.0E PA
Nokia N90 RAP3G v2.11 PA
Nokia N91 RAP3G v2.20E PA
Nokia N93 RAP3GS v2.0E PA
Download the BB5 Unlocker HERE
To unlock your phone, you need to have the following cables: DKU-5 or CA-42
With these cables you can connect your Nokia phone with your PC via a USB port.NOTE: No other cable will work because ONLY DKU-5 & CA-42 support FBUS.
(Pop-port cables DKU-2, CA-43 & CA-52 will not work since they do not support FBUS.)
You must have the latest version of that cable driver. Download here.
Note that phones with only a USB port(N91, N93i & N95) will need to use an unlocking/flashing box. Please see this forum for more details.
Battery should be fully charged & any SIM card should be removed.
Instructions:
1. Connect your phone with cable to computer. Switch on phone.
2. Go to Device Manager, Modems, Nokia XXXX USB Modem. Right-Click and access the phones’ Properties. In the Modem tab, note down the COM port(1 to 9).
3. Unzip BB5.zip in a folder & run `install.bat`
4. Open file c:/bb5_unlocker/logs/bb5_unlocker.cfg and write here the COM port(1 to 9).
5. Run c:/bb5 unlocker/BB5logunlocker.exe
6. Click READ PHONE
7. Click MAKE LOG, log will be created in the folder LOGS. This log contains your unlock codes.
8. Enter codes to phone manually, or
9. Click SP UNLOCK to enter codes via FBUS
Done!
If you have any problems using the Unlocker, post in this forum:
http://forum.gsmhosting.com/vbb/forumdisplay.php?f=299
GREAT THANKS TO DEJAN!!
UPDATE:
Step-by-step updated BB5 unlocking guides now bundled with Unlocker:
Download!
Phones that cannot be unlocked via this method, use a BB5 Unlocking Box
http://www.fonefunshop.co.uk/Unlocking/remote.htm
Update: Some antivirus are reporting BB5logunlocker.exe as malware/Backdoor.Trojan, but I can assure you it’s no virus.

Home




Please don't spam & don't swear!
Subscribe to my feed
-
Anonymous
said...
-
-
September 13, 2009 10:17 PM
-
Albert™
said...
-
-
September 21, 2009 11:36 AM
-
carrotmadman6
said...
-
-
September 21, 2009 4:23 PM
-
Anonymous
said...
-
-
October 2, 2009 8:43 AM
-
carrotmadman6
said...
-
-
October 2, 2009 8:47 AM
-
kiruthika
said...
-
-
October 5, 2009 10:38 AM
-
Anonymous
said...
-
-
October 6, 2009 5:12 PM
-
carrotmadman6
said...
-
-
October 6, 2009 5:20 PM
-
Anonymous
said...
-
-
October 6, 2009 7:07 PM
-
Anonymous
said...
-
-
October 10, 2009 12:56 AM
-
carrotmadman6
said...
-
-
October 10, 2009 7:30 AM
-
Anonymous
said...
-
-
October 31, 2009 8:06 AM
-
carrotmadman6
said...
-
-
October 31, 2009 8:21 AM
-
Anonymous
said...
-
-
November 4, 2009 4:02 PM
-
Anonymous
said...
-
-
November 19, 2009 7:32 AM
-
carrotmadman6
said...
-
-
November 19, 2009 7:45 AM
-
Anonymous
said...
-
-
November 24, 2009 8:58 PM
-
mike
said...
-
-
November 26, 2009 5:12 AM
-
carrotmadman6
said...
-
-
November 26, 2009 6:07 AM
«Oldest ‹Older 201 – 219 of 219 Newer› Newest»Well if this helps someone, I did make my own unlocking cable back in 2007 when the Dejan's BB5 unlocker was out.
As the unlocker uses the COM port, it was easier to use a serial data transfer cable used for older mobiles (or simply an FBUS cable for that matter), along with the USB DKU-5 cable. Found it simpler as I didn't want to have to damage my USB cable and still use it for usual data transfer...
Just connect the RX and TX pins of the serial cable to the Data+ and Data- pins of the DKU-5 and you've got your BB5 unlocking cable. Of course, the config file(bb5_unlocker.cfg) should contain the COM port you are using for this operation - like this if you are using COM 1: "COM1:" without quotes.
Basically, most of the FBUS cables around, use a MAX232A (RS-232 Level Converter)and and its pins 9 & 10 can be connected to a female USB connector which in turn can be safely connected to the DKU-5, without having to damage it.
Hope this helps,
Ivak
Will this work on an E71x?
@Albert™
No, it won't.
Can E63 be unlocked using this software?
@Anonymous
Unfortunately, you can't.
My friend using the Nokia 6630 which is locked to vodafone.She unlocked her mobile using the unlocking code.she got the unlocking service from http://www.unlocking4u.com/.
Hello, thanks for those nice infos, but I would really like to know what unlocking/flashing boxes for usb phones are ? , thanks ;)
@Anonymous
Here, take a look at the unlock boxes for sale - link.
thank you carrotmadman ;)
Hello is it possible to convert Nokia 3500cb to 3500c ?
@Anonymous
This software is used for unlocking, not flashing firmware. :)
hi, can i unlock my nokia n96 t mobile, if cannot what alternative do i have...pls hlep
@Anonymous
No, you can't unlock the N96.
Try searching around for an unlock solution for the N96.
Hi,
I'm having a some problem here, but if you can help me out with this, would be great. I can't unlock my Nokia N80-1 because i only have the CA-53 cable.
IMEI: 352764016862455.
Code: 0549462
Type: RM-92
FCC ID: QFXRM-92
IC: 661Z-RM92
If someone can help, i'm very greatful! Thank's a lot!!!!!!
sergioalbertopedro@hotmail.com
hey there mr. carrotmadman how many pins does the DKU-5 have? do you think DKU-5 with less that 13 pins would work with my n6630?
Tnx
@Anonymous
If you look at this pic (link), the DKU-5 has more than 13 pins.
hi... mine is a nokia 6280... do i really need the DKU-5/CA-42 cable to unlock? where to get those cable? phone shop?
would this program unlock 6280 v03.81 RM-78?
@Anonymous & @mike
Yes, you need the DKU-5 cable to unlock.
Post a Comment
Some html tags like <b>, <i>, <a> & emos are allowed. ;)